silvy1200 0 Posted January 27, 2015 this might be a dumb question, but are stabilizers bike specific? on road/off road also? Could they be adapted to different bikes? TIA Share this post Link to post Share on other sites
Goofy Footer 539 Posted January 27, 2015 Both GPR and Scotts sell "street" stabilizers and dirt stabilizers. The mounts are specific to bike - triple clamp and headstem configuration. You can go over the bar or under the bar (submount). What is better depends on your personal bike setup, preferred handlebar height etc etc. I like the idea of a submount as it raises the bar height and keeps the stabilizer safe from potential theft under the bars. GPR is located in Otay Mesa and offers free rebuilds on the stabilizer. Scotts is located in LA (I think) and charges for rebuilds or you can mail it to BRP in Colorado for a rebuild ($20-35). Share this post Link to post Share on other sites
Goofy Footer 539 Posted January 27, 2015 Scotts over the bar Scotts submount GPR over the bar GPR submount (on a husky) Share this post Link to post Share on other sites
silvy1200 0 Posted January 27, 2015 got it! thanks! Share this post Link to post Share on other sites
christi20 0 Posted January 27, 2015 I use Scotts and swear that it has saved me several times. I have two stabilizers which I can always switch over to different bikes as long as my other bikes have the mount plate and frame bracket. Share this post Link to post Share on other sites
Crawdaddy 96 Posted January 27, 2015 I've had Scotts and GPR. I prefer GPR. Ease of use/local outfit/good folks. http://www.gprstabilizer.com/ Share this post Link to post Share on other sites
KTMrad 516 Posted January 28, 2015 While many use them....I myself have never used one....not even on my 950 in the desert sand. I prefer to ride my bikes and let them do what they're gonna do without a stabilizer.I have ridden friends bikes with stabilizers and just don't feel the need....just my opinion. Exception...my Ducati 748 sportbike came with one from the factory. Share this post Link to post Share on other sites
350thumper 336 Posted January 28, 2015 I have to agree with KTMrad . I dont use them and never felt the need too.. and my bike does 91 m.p.h. in a sand wash.... On err time I ran a bungy cord from one side of the gas tank all the way twisted around my bars and back to the other side of the tank and that did make a difference. (Poor mans steering stabilizer) Just kidding I dont recomend that last part. Share this post Link to post Share on other sites
Wintyfresh 46 Posted January 28, 2015 On err time I ran a bungy cord from one side of the gas tank all the way twisted around my bars and back to the other side of the tank and that did make a difference. (Poor mans steering stabilizer) Just torque the hell out of the steering stem nut. Share this post Link to post Share on other sites
EddieEarl 6 Posted January 29, 2015 I run a Scotts and love it. Definitely feel a difference, especially at high speeds. A lot of guys don't realize there is quite a bit of "adjustability" of the damping on the Scotts, both low speed and high speed. Just like your suspension, you may need to play around with it a bit to find a setting you like, but there's no doubt race teams run these for a reason. They're legit. Share this post Link to post Share on other sites
tntmo 910 Posted January 29, 2015 I've owned bikes with and without stabilizers, I don't think I would go out of my way to purchase one but if a used bike comes with a stabilizer I'm not taking it off. I usually turn the daming adjustment down as low as it goes. Share this post Link to post Share on other sites
Uncle Champ 116 Posted January 31, 2015 I bought a bike with a fancy one on it, left it alone until following Bikeslut in Corral Canyon I found I couldn't turn quick enough to stay on the trail (a craftsman always blames his tools), I turned it down on twisty stuff and up in sand washes, it really helps with steadying the bars at speed when you hit a sneaky rock or deep ruts etc. Share this post Link to post Share on other sites