CVRick 42 Posted April 7, 2020 Does anyone have A recommendation for A pump for 110 psi for the Tubliss system ? I have an air hawk inflator that worked ok but the flexible hose is broken. I am going to look for parts to fix it but I was looking for what others might be using. Share this post Link to post Share on other sites
Ptkatoomer 114 Posted April 7, 2020 I use my compressor to get it close, then use a bicycle pump to get it the rest of the way and for topping off. Some bicycle pumps easily go that high. Share this post Link to post Share on other sites
Bp619 104 Posted April 7, 2020 Yup same as ptk just basic bike pump, do you mean Trailside Rick? If so look for a dual stage Trailside pump one that does high volume lower psi then switches to high psi low volume Share this post Link to post Share on other sites
ADV Bum 205 Posted April 7, 2020 something like this. I have a small pump that goes up to 150 psi. The type Bp619 is talking about looks pretty cool. I believe he is saying something like this https://www.amazon.com/Beto-Pressure-Schrader-Mountain-Bicycle/dp/B07TD8YQ4B Share this post Link to post Share on other sites
CVRick 42 Posted April 8, 2020 Thanks for the input. I do have A pump for trailside as well as co2 I have only filled the pressure in the garage and I only have smaller 12 volt or battery compressors. I am probably going to get A real compressor soon. Share this post Link to post Share on other sites