Czechsix 1 Posted July 23, 2012 Had to pull the head on the XR400 to deal with a recalcitrant auto decomp assembly, so might as well do new valves, cam, cam chain and guides, and get a few more CC's out of her (looking at the 416 overbore). So basically a three angle valve job that's done right, and an overbore that'd done right. Who does good work in North County? I've got a racer buddy that told me take it down to Motor Werks in National City..but if there's somebody local in NC that'd be great. Share this post Link to post Share on other sites
SteelRain 0 Posted July 23, 2012 Calling Crusty to the red courtesy phone... He has a 600L with a TON of work done. Share this post Link to post Share on other sites
Spaugh 1 Posted July 23, 2012 call these guys, haven't used them for valves but they did a crank rebuild and true for me and it came out good: http://www.racersmachine.com/contact.html or call all american ktm in ramona. RJ has neway cutters and can do a 3 angle job for a honda. he did a ktm 400 i used to own and his work was good. Share this post Link to post Share on other sites
amgems 79 Posted July 23, 2012 +1 Racers Machine. Has done a few jobs for me. Always done right. Share this post Link to post Share on other sites
socalhodaka 104 Posted July 23, 2012 +1 Racers Machine. Has done a few jobs for me. Always done right. +2. I have use them a few times. Share this post Link to post Share on other sites
dirt dame 561 Posted July 24, 2012 Another vote for Racer's Machine. Share this post Link to post Share on other sites
Bubbagums 42 Posted July 24, 2012 Use the 450x cam chain. Cheaper and beefier. Share this post Link to post Share on other sites
Czechsix 1 Posted July 24, 2012 Yep, planning on the 450 chain. Looks like it's gonna be Racers! Thanks for the feedback folks, helped plenty. Share this post Link to post Share on other sites