Uncle Champ 116 Posted December 5, 2011 Hello, This may be a bit technical and out of way for most ( it is a Honda afterall). Anyway the headlight went out on my X so I figured the bulb was bad, I took the bulb out and did a continuity test and both filaments were good. One contact was corroded so I cleaned that and reinstalled, powered up the light and no light , took it apart and the pigtail is melty. OK this is where it gets good the X only has low beam but the bulb is hi and low as is the wiring loom up to the pigtail. I checked on Thumper talk and the gist is because the X wasn't meant to be street legal in the U.S. they did not wire it for a high beam. I can make a pigtail but would rather buy one factory so do's anybody know if there might be a "european, Japanese" or something site that might offer this? Thanks, Unc C. Share this post Link to post Share on other sites
650ben 0 Posted December 5, 2011 I would give Diego a call at Baja Designs. I am sure they have something that would work for you. Good luck Ben Share this post Link to post Share on other sites
PastaPilot 17 Posted December 5, 2011 PM Johnnyairtime. He makes an HID headlight and has rewired many 450Xs for his lights. Share this post Link to post Share on other sites