beniflas

It also could depend on whether or not the bike is plated or OHV. If it's plated and not enrolled in SENTRI it could be construed as using non-SENTRI vehicle in SENTRI lane. A few months ago we crossed thru SENTRI with 2 OHV bikes and 1 plated (non-SENTRI) bike in bed of truck with no issues.....just saying

Jim, thoughts and prayers going out to his family and to you.

1 gallon Prestone bottle in an ammo dump pouch. Straps onto tool pack belt and also has a thigh strap..think drop down holster.

That is a great deal. Anyone wanna buy my Delorme so I can upgrade? ?

tntmo, have you tried contacting SpotX tech support? Hopefully this was just a one time deal.

Hmmm, must be an SDAR thing. I did a baja ride with another member that got a flat as we were leaving Tecate. Tire had about three 1-inch gashes in it. We pulled into a llantera and found a tire iron inside the tire. I'll try to dig up the pic.

Any SDAR guys do some 60s scrambling? Not calling you old, I ask in a respectful somewhat jealous way. I'm digging the shop art at about the 3:00 mark

Hardwired harness

2nd pic

Another thing to consider about that kit is that it's hardwired for the RH5R or Kenwood radios only. They offer a harness that can accept different "jumper cables" depending on what radio you're using. This can come in handy if happen to use a different radio brand/model. All you would have to do is get the corresponding jumper cable. https://www.ruggedradios.com/index.php?main_page=product_info&cPath=1104_1239&products_id=147 1st pic is the hardwired version, 2nd pic is the one that can use different jumper cables

Can the Governor grant me a work reprieve? I'm finally able to get weekends off, but now I miss out on weekday rides.

Yep, can't go wrong with MSR gear. I just ordered this pack, priced right and good reviews too https://www.rockymountainatvmc.com/p/4538/66157/MSR-A4-Hydro-Pack?c=5538

I'm running the same light at Mikey777 but I kept my stock headlight/turnsignal switch. I also added a dimmer from Baja Designs that when the headlight switch is in the low position it dims the light down to about stock headlight brightness and in the high position it shoots out full brightness.

Kenda Parker DT. Nuff said. I always thought the Maxxis chunked off too much in harder rocky terrain

Both date are full. . I also wanted to go.

Is this offer good for us Giants fans?

We made that left last year around March and came up to this gate. Same one you're talking about?

I think i know where thats at.

Thanks again Jim! I'll check the GoPro footage for the BP near miss and birds of prey...military chopper and eagle.

Fixed it for ya

I'll be the cameraman. You can back up to your driveway so your trucks rear wheels are at the curb and that would set the rear of truck at its lowest point. If you live on narrow street and can't block the street then drive up your driveway and stop so rear wheels are at curb. Batman doesn't need ramps.

I'm not saying it can't be done in a 2wd. A few years ago I did a poker run thru that area in a 2wd ranger...but it had all terrain type tires,regeared with limited slip and i was already familiar with the area. I drive that area alot in a 4wd and i often test/challenge myself to see how far i can go in 2wd.

Zubb, The roads into the campgrounds like Blair and Bow Willow are doable in a 2wd Tahoe. The other roads not so much. I really can't speak for anything north of Blair campground, but i know that every primitive road south of that would require either skill and right equipment in a 2wd or preferably 4wd.

Garmin 60cx, noob friendly unit for a good price. http://advrider.com/index.php?threads/garmin-60cx-gps-w-ram-mount.1209089/