vandrz400 0 Posted April 15, 2014 I have a 08 drz 400s and also have a 60 watt led light bar. Does any body know if the high beam switch leg will be enough to power this or will I have to route it through a relay of some sort.the idea is to start night riding this summer with 6500 lumens of LED crazy brightness > PLEASE HELP Share this post Link to post Share on other sites
bikeslut 1 Posted April 15, 2014 What? The stock DRZ headlight isn't enough *insert scarcasm smilie here*..... I'm not able to help, just thought I would empathize with your plight Share this post Link to post Share on other sites
vandrz400 0 Posted April 15, 2014 im really hoping this will slut Share this post Link to post Share on other sites
CableJockey 1 Posted April 15, 2014 The standard H4 bulb is 55W on low and 60W on high. The wiring is correctly sized for your 60W flamethrower IF you're only going to run the light bar. If you run your headlight and the light bar together you would double the current and that would drop the voltage to both lights and COULD overheat the wiring. Share this post Link to post Share on other sites
KE6UPI 0 Posted April 15, 2014 Sounds light you'll need a relay switch.. 60W / 13.5V = 4.44Amps David Share this post Link to post Share on other sites
vandrz400 0 Posted April 17, 2014 relay ordered .thanks guys Share this post Link to post Share on other sites
hoss314 0 Posted April 17, 2014 Lighthouse Inc 610 Gateway Center Way San Diego Share this post Link to post Share on other sites
