Corpic

It has never been registered In Ca it still has Vermont plates W/ a sticker from 06 the previous owner claimed that it has been non op since then . My question is if I make a DMV apt for inspection will I be able to get a new Ca plate or will I be forced to make it a green sticker bike

I have had great results W/ Tokyo Mods in San Juan Capistrano you would need to take carb off the bike and bring it to them give them all the info of the bike. It will come back perfectly jetted and start idle and run perfect in my experience. I usually do all my jetting and maintenance myself but had a CRF 450 X the sat for a year and a half gas totally clogged up the carb , I took the carb apart several times and never got it to run correctly. I got my carb back from Tokyo Mods and that bike had never run and carberate so cleanly. It cost me $ 200 W/ parts but I felt it was well worth it.

I am interested where and what time you thinking? Palomar on the road W/ my sporty would be cool , I am in San Marcos I could do a couple of Palomar laps then maybe over to Mesa Grande to Highland Valley rd. I'm in north county too. I may try to get an early surf but then again an early ride sounds good too. I'm pretty flexible. What time works for you? What do you ride? Turns out I need to work today, so maybe another time. I have 625/525/300 KTMs and a Sportster

I am interested where and what time you thinking? Palomar on the road W/ my sporty would be cool , I am in San Marcos

Thank you for a great ride,next time I will hydrate better.It was nice to meet you both.

I will see you out there in a white Ford truck W/ camper shell and a bumper rack. Is any parking or adventure pass needed?

I am in San Marcos and I see you are in Escondido What time do you usually leave to get there then? Thanks.... Corey

I would like to go, I have never ridden in that area before so I do not know the usual place and time.I have a KTM 300 dirt only and a plated 525 EXC

316 should work well use lowest heat possible, if its a large area use a back purge to avoid carbide precipitation( cap pipe and purge W/ argon ) good luck