Jump to content

jbw

Members
  • Content Count

    475
  • Joined

  • Last visited

Posts posted by jbw


  1. Just putting in a good word about Spaugh's work. I have done a good deal of riding with Spaugh and back when I was in SD going to school at UCSD with no garage space would often be over the day before for bike work. Sometimes just as guide and for the more complicated showing me how things were done. This included most all the common maintenance items on a range of bikes including KTM 300, KTM 400 and KTM 200: Forks, shocks, jetting, top ends, adjustments, and fixing many common trouble spots. He knows about the KTM's quite well, their common weak spots and what needs to be done to make them better. Highly recommended.


  2. Another vote for hydrolocked. The symptoms seem to match best I can tell: It is only clicking once which is normal, that is the relay connection being made that powers the starter happens for all the bikes when you power the relay. The starter turning the first time and the battery remaining at 12.9 for this means it is likely not the battery (you also likely would hear a series of clicks for a bad battery as the voltage oscillates). If you test the voltage at the starter you likely will see it lower, you will lose voltage from the slight resistance from the battery to the starter as current will be pulled from a stalled starter this depends on how much the stalled starter pulls but a motor pulls most current when stalled (If you do see quite lower voltage at the starter then you may need to start looking for the voltage drop in the wiring between the battery and starter). The starter not turning the next time is because the system has taken all the free space up and no longer can turn anymore.

    Just as a test take out the dipstick and smell the oil that is in the frame, bet is smells like gas.

    Regardless of that test, take out the spark plug and make sure to disconnect the spark plug from the cap and turn it over by putting it in gear and rolling the bike. Do this slowly and with eye protection. Do not use the starter for this. If it is hydrolocked, then it likely is gas (the DRZ does not have an overflow on the Mikuni carb) and you do not want any electrical charged if you pump out the gas especially a spark plug right next to the hole. This can happen on bikes like this one with a manual petcock (it is a WR petcock that actually was found to work by TNTMO for the DRZs) if it is left on and the carb needle/seat/oring is going bad (common occurance) and lets gas leak into the cylinder. If it is hydrolocked you will need to drain the oil a few times to clear the gas out. It likely is fine after the oil changes. You will also want to pull out the carb and inspect the needle/seat/oring, it likely is just the oring getting hard and letting some gas pass by probably not even something that is critical for the trip but just remeber to turn of the petcock.

    Note: do not try to bump start it until you verify that it is not hydrolocked. Doing so while hydrolocked is not going to work and possibly be bad for the internals of the motor. I think the rear wheel would just skid.


  3. This was a great ride, a few more pics to add:

    You must navigate multiple mountain passes, both the passes in the distance are part of the trail. You can see the trail clearly only on the first.

    IMG_2396_zps11fb809d.jpg

    Jon making it up a space confined step up.

    IMG_2388_zps16749e31.jpg

    Brad heading up from a small stream. The good thing about this trail is there are multiple options for refilling water, a water filter is a must for this ride.

    IMG_2392_zpsb78d8c6c.jpg

    Brad making it up yet another rock field.

    IMG_2400_zps15c0e8af.jpg

    The trails nearing the end of the rincon are rarely used and are often some pretty small ledges.

    IMG_2404_zps7f649e57.jpg

    Jon heading up a part of the "Hill of Doom" on the way back from the river.

    IMG_2407_zps4d7ce6c4.jpg


  4. As bikeslut mentioned Brad and I went up the Rincon trail on day 2 of the trip.

    This trail is considered one of the more technical, it really does not present any single obstacle that cannot be passed without help but a relentless array of difficult rock gardens, rock step ups, hillclimbs, log crossings and off camber hill sections. It starts at the Kern river and heads up and over multiple mountain ranges and then back to an upriver portion of the Kern. A truly epic ride.

    Getting to the trail was a bit troublesome as there were a host of fireroads packed tightly right near the entrance, We knew the general direction and we managed to pick the right combination the first time and ended up at the trailhead.

    IMG_2778_zpse7f18f7c.jpg

    Initially you start out near some smaller tributaries with a whole lot of rocks. A decent set of the rocks are not very "clean" and they require some footwork.

    IMG_2779_zpscb292178.jpg

    The first risky obstacle is just past Salmon creek there is a boulder that sticks out and an off camber climb. This is not particularly difficult but the risk factor is fairly high.

    IMG_2783_zps3d227c46.jpg

    IMG_2785_zps4dab2a00.jpg

    Another obstacle of note is the start of a grueling hillclmib climb, up what is an incredibly steep hill, the run-up is only about 15 feet and as with many pictures it is much steeper than it appears.

    IMG_2790_zps3c7c2da5.jpg

    Yet another rock field.

    IMG_2793_zps727d67af.jpg

    Rock step up.

    IMG_2794_edited_zpsd113c511.jpg

    Stream crossing + limbo

    IMG_2796_zpsb1a884b6.jpg

    Continue on the way up

    IMG_2797_zpsfac1891f.jpg

    Trail continues past many mountain passes (you can see it going up the mountain in the distance).

    IMG_2800_zpsbb7a5815.jpg

    It was getting late (started this trek too late) and gas was looking to have been used faster than usual and we were way out in the wilderness, it seemed a good idea to turn around even with only 1-2 miles left to reach the Kern.

    IMG_2806_zps8ebecfda.jpg

    Heading back

    IMG_2808_zps16433af9.jpg

    A slightly off camber section with a narrow trail to test the nerves on the way back.

    IMG_2809_zps0b5c21e4.jpg

    A seemigly simple tree to make turns out to be much harder when at such a great angle. Took three tries to make it over.

    IMG_2804_zpsf820185e.jpg

    I had a great time, I would even consider going back starting earlier and carrying some extra gas to make it all the way with some extra confidence. On the way back we were even getting low on gas and just hit reserve before rolling up to the truck. According to the map we had gone about 35 miles of pure singletrack which means our bikes got gas mileage much below normal as reserve is usually hit at over 50 miles.

    The whole trip was amazing, the variety of trails within the forest and the trek out was quite an experience.


  5. Probably a stupid question, but is the dirt section of Mulholland Drive -- known as "Dirt Mulholland" -- in Los Angeles dual sport bike-able? Heading up there on the Scram.

    http://en.wikipedia.org/wiki/Mulholland_Drive

    Unfortunately not much dirt is available in the area. Most of dirt Mulholland is behind a locked gate and is a state park fire road (it was open many years ago). There are a few miles that head up from the valley until the gate that is dirt and legal but hardly a destination to go out of your way for, it then turns off into a private paved road into Topanga Canyon the private road has been used for decades but never have gotten any seconds looks when passing through (I did know someone who lived there). What the area does have is twisties, great riding back when I lived there or visited the family and had a Sumo'ed DRZ.


  6. Well I am super excited, going to head down to SD this weekend for bike pickup and some riding of the sweet technical Corral singletrack and jeep track!

    Hey josh how you doing :bye:/>

    Doing well, up in the Bay Area now after the transition from school to work. Riding opportunities in the immediate area are a little less diverse but still decent, but at around 3 or so hours away you can get into some really nice singletrack. Oh, and really good mountain biking, even in the heat of the summer it stays fairly cool in the Redwood forests.


  7. I see that you are waiting for a reply "Trolling"

    You know the lights on the dash board they call idiot lights, party.gif

    waiting for your bike to boil over. :heh:

    I am in no way trying to incite or troll anybody and am sorry if you feel that I am.

    I get email notification of quotes of me so maybe that is why you think I am waiting for a reply?

    (quote added for accurate context)


  8. Here is my initial theory...The pressure that the cap releases depends on relative pressure to the outside atmosphere thus it will let coolant out at a lower absolute pressure and thus temperature than when at sealevel.

    Also lower density air does not cool as well.

    I will not run coolant that does not boil... seems like a good way to blow up your bike! Boiling is a great indication that the bike is too hot.


  9. What I found odd is that it ran really good up to the point of dropping in "fresh"(?) gas in Borrego Springs.....I put in 2 gallons and ~4.5 oz. Motorex Cross Power 2T oil (~55:1) Rode three miles and it died

    I am new to 2 strokes but from what I have heard when running lean the bike can still feel good, running rich the bike will not. edit: Oh, I just re-read the quote and I misunderstood the meaning.

    When you opened the throttle quickly would you get a bog?

    Also, I have heard that lean running 2 strokes will ring like a bell but it seems you did not hear any of that.


  10. IT'S A FUEL TANK !!!!! Not exactly the time to go cheap or half ass.

    ^^^This!

    But to expand on the point. From what I had read a while ago and should be double checked, it that gas tanks are a certain material (Polyethylene?) that is not easy to work with in terms of glues as the things cannot make a chemical bond easily. To add to this it has to be gasoline proof.

    If one has to do a repair on it the right way is to "weld it" with a heat source like a soldering gun or iron and a stick of plastic of the same material to make a "bead". Now in terms of a crack i think best practice is to drill small holes on the ends of both so that the crack will not continue.

    This probably does not need to be said but certainly should be for safety sake: make sure no gas is in it when you apply heat... I would think you would want to have the tank off the bike and filling it with water but even that seems a bit dangerous as gas floats on water, So I do not know how to do it safely.

    All of this is from memory of something I never did... So it needs to be verified.

    Good luck.


  11. I should be more clear... the Alarmist BS is the fact that the author uses a study that "concluded that biases and errors limit the strength of these conclusions and prevent a causal interpretation" to form a causal link as the title of her article makes clear, "Cell Phones Do Cause Brain Tumors".

    The author twists the study to serve her own purposes and ignores what the study and WHO actually found “To date, no adverse health effects have been established as being caused by mobile phone use.” So yes in fact the author clearly is wrong in her interpretation of the study. I would say that the argument I posted before is much closer to the truth.

    This is not to say that the issue of cell phone safety is fully known, this is something I clearly stated earlier. I would actually advise people to take some precautions like using a headset, there is no harm in being safe here. It is just not as well know as this author claims.

    Playing it safe is a good bet, but even according to the cited study, safe (actually beneficial) is anything less than 30 minutes per day. This actually is more a point why the study is probably flawed as cell radiation has no know reason to be beneficial.

    So to be clear I do not "say it'a alarmist BS, just because it hasn't been proven." I say it is alarmist BS because she misrepresents the study, going as far as directly oppose the studies findings, arguably to suit her own ends. I also do not say that cell phones do not cause cancer, the truth is I nor her really know.

    Magda Havas is a longstanding "researcher" in the field of EMF exposure and also has speaking engagements about it her website. She conducts her own studies as well but they are not well controlled and are often found to be sharply in contrast with accepted studies. Her research is peer reviewed but from some examples I have found they are internal publications at like minded institutions which are not regarded highly of. They would not be accepted by the scientific community at large.

×

Important Information