ADV Bum 205 Posted June 6, 2020 On the last sunset ride I discovered some issues with the Ktm 990. First my fans were not working. Then my Zumo decided to quit working as we came down the mountain. I fixed the thermostat. Pretty easy fix. I replaced with a lower temp thermostat. The Zumo was a little more involved. I did not want to scrap the Touratech mount for the Zumo and spend a bunch of money to replace with another system. The old Zumo was locked in a mechanism attached to the mount. I had to cut the screws to look at what I had to play with. Once off I figured I could make an adapter plate and reuse the Touratech Nav mount. I wanted to be able to mount both my Garmin Montana and my phone. I had the power cradle for the Montana so I attached it to the plate and attached the ram mount for the phone. Turned out well enough. I will use it. I may trim and add some more rubber to the mounts, but for now it will work. I am hoping to do the same on the 500 when it arrives so share devices easily between bikes. Share this post Link to post Share on other sites
Bp619 104 Posted June 6, 2020 Nice might do something similar on 950 with phone mount Share this post Link to post Share on other sites