Krs1 0 Posted December 12, 2014 Hello all, i have looked for this subject and im sure its out there but couldnt find it. i wanna know how many teeth my stock sprockets have. i believe 14/43 but not sure. i want to get more out of my low end so i placed a 13 on the front with a small amount of change. my questions are if stock is 43 sould 45 make it to low and if i did go 45 would the stock length chain fit with the 13 in the front? btw its a 1990 dr 350s. thanks in advance!!!!!! Share this post Link to post Share on other sites
bikeslut 1 Posted December 12, 2014 I thought it was 15-44 and 110 or 112 links...if you're worried about it, drop the front sprocket a tooth, rather than replace the rear Share this post Link to post Share on other sites
bikeslut 1 Posted December 12, 2014 Oops- sorry didn't see you already went to a 13- I would think you're ok going up for the rear Share this post Link to post Share on other sites
Krs1 0 Posted December 12, 2014 the sprocket i took off was a 14 and believe it was the original. would the current chain fit if i went up un the rear sprocket? Share this post Link to post Share on other sites
bikeslut 1 Posted December 12, 2014 Ok- im finding conflicting sources on-line- just found one saying 14-43 and another saying 15-44...so; let's say yours is 14-43 and you went down a tooth up front...assumed then, that you have one tooth to add in the back, right? also, assume that there are some adjustments you can make fore and aft, I would guess you're ok Share this post Link to post Share on other sites
Bagstr 287 Posted December 12, 2014 http://www.gearingcommander.com/ If you are not riding the Highway a 48 rear will help when used with a 14 or 13. Just because you want the chain to match what you need, does not mean it will. Bags Share this post Link to post Share on other sites
robertaccio 406 Posted December 12, 2014 http://sprocketspecialists.com/?s=suzuki+dr-350&post_type=product Share this post Link to post Share on other sites
robertaccio 406 Posted December 12, 2014 off road specific trail/ride/race gear recommended, 13/50 (3.85) if it fits your model or go with 12/47 (3.92) to get very near the same final drive ratio. The 50 tooth rear sprocket may not clear on S models. Share this post Link to post Share on other sites
tntmo 887 Posted December 12, 2014 I will take a look at the sprockets I have laying around. I think most are for the dirt model wheels. Hey, need an extra set of wheels?? Share this post Link to post Share on other sites
Krs1 0 Posted December 12, 2014 I would love an extra set of wheels! Also want some sprokets. How much? I ride lots of street but want to compensate a little and meet in between for street and dirt. I don't do freeway just highway at 55-60mph max. Bike slut what do you mean adjustments front and back? Chain tensioner? Share this post Link to post Share on other sites