Leaderboard

Engine is all buttoned up...but will open clutch cover for inspection and dump gearbox oil for Redline 80W Synthetic. Needs Evans non-aqueous coolant fill up (bullet proof). Needs a finish job on the Head and Tail light connections. Graphics are all in place with exception of 1997 World Enduro RED number plate back grounds and some homage to Farioli KTM Race bikes of the era. Ignition notes after a full clean up of the system she makes good spark , even with the cracked OEM Kokusan CDI unit, but since I payed for an all new unit the new one is installed. Photo shows the old unit with fork leg impact damage. Carb went on easy and is jetted per FMF spec. new vent hose kit installed. She is very close now, best news is, we have good compression and spark!! we just need fuel, Motorex at Euro style 2% Miscela (50:1) . Need a few more hoses as well, fuel line and tank vent hose. I have on the shelf new rear Shinko 216MX FIM 140/80-18 and an almost new Michelin Enduro Medium FIM 90/90-21 tire and some perfect used Mousses and pieces if required ready to install. Chain appears good and I will clean and reinstall it. Debut will be soon, most likely at local trail zone. Before I reinstalled the rear linkage I fully lubed it with Maxima grease, so that's dialed, just need a little exterior brushing on the links to clean them up from old dirt and oil stains