Jump to content
robertaccio

Carbon Up Clutch Covers for KTM/Husky

Recommended Posts

Whoa Dude!   I know a guy who can use one of those.

  The product looks as if it could survive multiple drunken oil changes.

    :ph34r:

Sent a message to Slaven's requesting intel on alternator side covers.

Share this post


Link to post
Share on other sites

Looks wider than the stock cover; but the bolt pattern was not the same as the stock cover. May add more oil capacity, but may need to widen the break arm distance. Any ideas? 

Share this post


Link to post
Share on other sites

Probably same size as rekluse cover which adds almost .2litre and still fits well with no  mods to brake lever

Share this post


Link to post
Share on other sites
1 hour ago, Bp619 said:

Probably same size as rekluse cover which adds almost .2litre and still fits well with no  mods to brake lever

Thanks Bp619!

Share this post


Link to post
Share on other sites

The only thing I don't like is using the gasket instead of an o ring in groove seal.

Also use your torque wrench you can bet the seal surface will be tight at the fasteners and less between especially if you over tighten the fasteners causing uneven mating surfaces from cover flex.

Share this post


Link to post
Share on other sites

Jeff got back to me regarding alternator side case;

" Dave:

 My guess is it will be a while. Each mold cost $80,000 and they have made three so they need to sell what they have to get some money back in the bank. "

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information