robertaccio 406 Posted March 31, 2017 Been using these for over a year now, I broke one at the last NHHA and DE replaced it at no cost. They are simple very effective and light as well as completely unobtrusive on the bike. Great product I highly recommend these. I've put them through hell and they are keepers for sure. Buy direct from Discover Enduro or grab a set from Jeff at Slavens Racing. They come in various colors as well. Share this post Link to post Share on other sites
Bagstr 287 Posted March 31, 2017 Agreed But,,,, The Discover Guys have not got off the dime to produce a design for the " New Improved " KTM WP fork in production from 2016. I.E. the pinch bolts are now horizontal. Share this post Link to post Share on other sites
robertaccio 406 Posted March 31, 2017 yes they will not fit my new bike..........but I will test them with a heat gun and see if they can be re-molded and drilled if needed. Share this post Link to post Share on other sites
Bp619 104 Posted March 31, 2017 33 minutes ago, robertaccio said: yes they will not fit my new bike..........but I will test them with a heat gun and see if they can be re-molded and drilled if needed. Your new bike??? Ive already smashed my 17 300xc axle nut and need a fork guard like these Share this post Link to post Share on other sites
robertaccio 406 Posted April 1, 2017 they are on my 2014 they are not configured fro the AER forks......on my new TX300.......yes i finally did it after waffeling for months Share this post Link to post Share on other sites
Ptkatoomer 114 Posted April 1, 2017 https://shop.enduroeng.com/cgi-bin/commerce.cgi?preadd=action&key=13-145 Yeah, I needed something for last year's Tecate enduro so I went with this. They also sell a matching lug guard for the other side Conrats on the new scoot! We'll need to compare 300 's to see which one is best! Share this post Link to post Share on other sites
robertaccio 406 Posted April 2, 2017 i just did jetting by the book slightly leaner... 2.5k to 5k feet 60-79 deg F was lower and colder as it came OEM stock. and yes I know there are a million experts on jetting these things out there enough bs to make me want to shoot myself!!! I will play with book settings then go to James Dean if needed. Share this post Link to post Share on other sites
Ptkatoomer 114 Posted April 2, 2017 I'm not fussy like you Rob, but I did open up my airbox and lean out the needle one position. The bike runs good everywhere from the desert to Tecate. Share this post Link to post Share on other sites